Here is the 350 somewhat put together. Hoping to get the cross member problem solved so I can get the frame work finished to put the engine on. Maybe you can help. The bracket the bolts to the frame for the upper control arm is rusted through. I am looking at another cross member but I have already ordered the disc brakes swap for this cross member. I don't know what cross member to buy to still use the bolt on disc conversion. I would hate to have to sell them for a loss but if I need to I need to. Does anyone have a suggestion. Maybe the Mustang II although I have heard of problems.
I am down to the frame on my 64 stepside c10. I have most of the body work done. Working on the cab and bed and it will be ready to be put on. That is after I figure out my cross member problem so I can drop in the 350 engine with a 700r4 transmission. I will post some pics once I get to the house.