Hotrodders Bulletin Board - Journal

Hotrodders Project Journals
Home Page · Bulletin Board · Project Journals · Tech Article Wiki · Project Journal Archives · Knowledge Base · Photo Gallery · Classifieds · Company Reviews · T-Shirts

We wrote an article exposing a kit-car company called Streetbeasts.

Now, they've tried to silence us with a frivolous lawsuit.

Guess what happens when unethical companies try to bully hotrodders out of their free speech?
Get the details, and see how you can lend a hand.

Hotrodders Bulletin Board > Journal > S10xGN's Journal

Entries: 38
Views: 5146

view from the beginning || now viewing most recent entries

Pages (8): [1] 2 3 4 5 6 7 8 »

02-19-2008 01:58 AM

Body on Frame today.

Creative use of the engine crane, I used it to lift the body off the rotissiere and push it over the frame. Rear wheels install just fine *if* the car is raised enough to roll the wheel under it, yes a floor jack will get it high enough.

(click photo to enlarge)

[Entry #38]

02-07-2008 03:25 AM

Ankle Biters

AKA running board mounts.

(click photo to enlarge)

[Entry #37]

02-07-2008 03:24 AM

Engine & trans in place

Got the '03 Corvette LS-1 & 200R4 from an '85 MCSS set in place today. The oil pan is from a CTSV. The A/C is a low-pass mount setup from S&P (the only way to fit air down low). Also got the "ankle biters" installed, but will need new bolts. She's got 6" ground clearance under the front X-mem & 4.5" under the pan.

(click photo to enlarge)

[Entry #36]

02-05-2008 11:40 PM

Finshed frame!

Now a roller!

(click photo to enlarge)

[Entry #35]

02-05-2008 11:38 PM

Frame being assembled!

A few pix of the finish (Hammerite Silver) and frame being assembled. Let's see... epoxy on Saturday, Hammerite on Sunday, assembly on Monday. Wish I could work that fast all the time!

(click photo to enlarge)

[Entry #34]

Pages (8): [1] 2 3 4 5 6 7 8 »