After all the headaches in the body shop, now the jeep is in the paintshop.
Before going to the paint shop, I pulled out the engine and tranny for rebuild and modifications.
Well the AMC 304 is not going back in again. I found an AMC 360 and planning to make modification for a better output.
After interrior, underbody, and engine compartment paint is finished, and the body is primered I'll be taking the jeep back to the mechanic shop again ( it's just across the street) for mechanical works which have to be done.
After dropping in the engine, we'll then go back to the paint shop for the rest of the process...
The chassis and under body have been washed, and cleaned with fine sand paper, and will be soon waxed and rust/dent proofed.