Looks as rude as the title suggests! lol
Harley Davidson oil filler caps work well as bungs for the buck tubes & a remnant from my weed-soaked youth plugs the original hole in the bottom left corner of the front wall of the buck a treat.
Picked the truck up yesterday & pleased as punch with the work that's been done.
Special thanks to John Hogarth of S.I.D. (Specialists In Design) in Great Yarmouth for sorting out the teething troubles.
All that's left to do is fit the floor in the buck.
The truck may well go back into the workshop during the winter to have an LSD & linear actuator fitted, but these items aren't necessary at the moment & I want to show her off through the summer...
I had all kinds of ideas for plugging the ends of the rolled tops of the buck, but finally settled on some modified Harley Davidson oil filler caps.
The hooks for the buck have been plated & I also got a stainless overflow tank for the rad. Plus some more shiny bits!
There's quite a bit of stuff you can't see from the pics, like a stainless custom rad cowl & line lock, but I'll post a final review when it leaves the shop.