February 2004
OK, I've got the interior done so now it time to make some noise.
After I tore the motor down and set it in the frame its just kinda been there, I had not started it to this point. Well I have a EZwire kit under the dash ready for the wires to be run but no other wire in the whole truck. So I got a few small parts that I needed to start the engine in place. It came with a 850 CFM Holly but I'm going to change that out to a 625 Demon later. Well after setting everything up got it started with very little problem. Dropped right in to a nice smooth idle with good oil pressure so I'm happy now.
(click photo to enlarge)
|
|
|
)
)
)
)
)
)
)
)
)
)
)
)
)