Got the rest of the front clip on, all the headlights in and lights working. Hood is on and adjusted. Interior is back together. Have a small issue with the 2004R - weird upshift to 3rd. Need to get the front seats redone and then off to body and paint. It's been a long 3 years to get it back to running and driving.
Been working steady on the Monte Project the past few months. Motor is in, trans is in, Exhaust is done, all new suspension and brakes, Hand built electric fan shroud, Fuel tank removed and cleaned. Hoping to fire her off 11/26/11
Also been building a 440 for a 65 Fury III. Lots of challenges in this swap. Was going to rebuild the 318 Poly and make it a stroker but found a fairly fresh 440 Mopar crate motor. Had a big block 727 trans rebuilt and kitted - got it stuffed in last weekend. Had to run down a Driver side exhaust manifold as the B body headers I bought will not work on the 65 "C" body!
Spent the last year doing several Fiero swap projects. 2 3800 SC's, a 4.9 Caddy and a 350 SBC. Finally got the time to et mack to my Monte. Just finished the motor rebuild, picked up a fresh kitted 200R4 and will be stuffing the motor this weekend.