These are a few shots after my order for metal came in. I ordered 60 foot (a little much) of 14 gauge 1x3" tube,and 2 4x8 sheets of 16 gauge metal. I ended up getting 14 gauge because a mess up on there end but I just accepted the extra beef and went on.There is also a photo of how I am building my B pillars.
I picked up this car a little while back complete minus the driver door/dr. rear fender for $200. I stripped it down to its shell,hit it with a coat of black primer(to keep the city happy),and gutted the wood out of it. As it stands my plans are a mild 327, a t-5 trans out of a 86' camaro/firebird,a 1st gen s10 rear end with 4:11's and a mini spool.The front end will be a mustang II style running hubs with the s10 lug pattern. The body should be finished with a mild 2" chop,a flush gas filler,34-35' front fenders-hood and grill.