Hot Rod Forum : Hotrodders Bulletin Board

Hot Rod Forum : Hotrodders Bulletin Board (http://www.hotrodders.com/forum/)
-   Hotrodding Basics (http://www.hotrodders.com/forum/hotrodding-basics/)
-   -   K-line Ind (http://www.hotrodders.com/forum/k-line-ind-231331.html)

tresi 03-31-2013 01:22 AM

K-line Ind
 
Did K-line ind. go out of business. Thier website doesn't work anymore and the only site that seems to work is any Ebay clearence store. Does this mean the Bronze -Bullet guide liners left are NOS?

BOBCRMAN@aol.com 03-31-2013 06:29 AM

The liners are available from several different sources. Goodson, Silver Seal, for example.

tresi 03-31-2013 11:12 AM

Yes I know that but I thought Goodson split from getting their stuff from K-line several years ago. I've been out of this for several years due to health challenges and the death of my wife so I got a little catching up to do. I'm jumping back into it but I just do this on a hobbyist level. I have heard rumors of the sleeves not fitting right if you mix brands of boring tools and sleeves. Any truth to this?

BOBCRMAN@aol.com 03-31-2013 01:24 PM

Yes there is some incompatability. Just have to watch the OD. of the reamer and use liners that match.


All times are GMT -6. The time now is 08:34 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.