|
|
|
08-17-2004, 09:35 PM
|
||||||
|
||||||
|
KD Tools
I have some tools that my Dad had when he was a mechanic. He retired circa 1980. He later passed on. Anyway, several of the tools are of the "mystery" type.
One tool appears to be some type of pliers. It is stamped KD #435. I've checked all over with Google for KD, but all I find are distributors and cannot find anything even close. Does anyone know of a source for KD info? 
|
|
08-17-2004, 09:49 PM
|
|||||
|
|||||
|
Napa and any other real parts store would carry the K-D line. You'll find that most of what K-D makes is special application or specific use tools. You might try thumbing through a Napa catalog (online?) for info.
|
|
08-17-2004, 09:51 PM
|
||||||
|
||||||
|
Try this one. They have illustrations or pictures that might help.
http://www.mytoolstore.com/kd/kdindex.html Larry
|
|
08-17-2004, 10:14 PM
|
|||||
|
|||||
|
The Ram-o-Matic grease zerk tool is exactly what I suggested to a guy in another thread that had kingpins that wouldn't take grease. They work killer.
|
|
08-17-2004, 10:16 PM
|
||||
|
||||
|
I have a lot of K-d tools now Freebie,freebie,zip,zero ,nada.
|
|
08-17-2004, 10:27 PM
|
||||||
|
||||||
|
Maybe someone will recognize this thing:
|
|
08-17-2004, 10:29 PM
|
||||||
|
||||||
|
Another shot:
|
|
08-17-2004, 10:30 PM
|
||||
|
||||
|
I have one but dont know what its used for .
|
|
08-17-2004, 10:52 PM
|
||||||
|
||||||
|
I think that's a cv-joint boot clamp tool for big trucks and 4X4's.
Or a manly man tongue piercing jig. Larry
|
|
08-18-2004, 03:38 AM
|
|||||
|
|||||
K-D Tools is part of -Danaher Tool Group-. Their website sucks, but it appears that tool no. has been discontinued. You might want to E-Mail them and inquire as to it's application. Someone is probabaly needing one now...
|
|
08-18-2004, 08:35 AM
|
||||||
|
||||||
|
Thanks Kutulz.
|
|
08-18-2004, 07:18 PM
|
|||||
|
|||||
|
Quote:
 
|
|
08-18-2004, 07:26 PM
|
||||||
|
||||||
|
that looks like somthing that your wife would use to "grab hold" of you if she caught your eyes wandering to much.
|
|
08-18-2004, 09:23 PM
|
||||||
|
||||||
|
I'm afraid that would leave a mark with those pointed tongs!
FYI, I've spent about 3-4 hours today scanning the Snap-On site for some of the other tools. Most have apparently been discontinued. I did find an updated model of one of them, a clutch alignment tool...that currently sells for $455!! I may start a "Can You Name That Tool" thread. Some of these things are really bizarre.
|
|
02-14-2010, 03:17 PM
|
||||
|
||||
|
KD tool #435
This is an interior door handle removing tool for 1956 Chrysler Corp cars (and no doubt for several other years, I'm sure).
|
|
|
| Recent Garage - Tools posts with photos |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
