[67-4-fun]

Im going to change out the leafs for a ladder bar coil over setup in my 67 camaro. It will have a 2-3" mini tub.. My question is i did some measuring with the stock rear end as it sit from the factory and from the edge of the rear end housing to possibly where the crossbrace would be for the ladder bars, measures about 25" roughly, most ladde bars are 32" or longer, so what is the best route for this project, make my own, which i can do or can the 32" bar work? or is there something im missing and i dont know it to make a 32 bar work.