|
|
|
07-22-2006, 02:52 PM
|
||||
|
||||
|
left side brakes wont work
i rebuilt the master cylinder on a 57 chevy pickup and there is one line for left side brakes and one line for right side brakes. the left side brakes bleed out easily and hold very well but the right side bleed out but does not hold. i pulled the drums off the right side and the wheel cylinder does not push out when you apply the brake and there is corrosion under the wheel cylinder rubbers. could the wheel cylinder be froze up?
|
|
07-22-2006, 03:32 PM
|
|||||
|
|||||
|
try and take somthing to cleean of your rust then you might use wd 40 and spray on it see if that is you problem
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Thinking about swapping rears: Will getting the brakes to work be easy? | Dirk Squarejaw | Suspension - Brakes - Steering | 3 | 06-26-2006 05:38 PM |
| G body with manual brakes - it works! - pics | dh79 | Suspension - Brakes - Steering | 7 | 08-27-2005 10:55 PM |
| Brakes locking up in non ABS system | nprfan | Suspension - Brakes - Steering | 9 | 08-24-2005 12:37 PM |
| Push Brake, Hang Left, Clean Shorts! | M&M CUSTOM | Suspension - Brakes - Steering | 12 | 11-15-2004 05:34 AM |
| Fan hit upper rad. hose!! | mustangdude947 | Engine | 14 | 08-19-2004 03:52 PM |
