Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Lighting a Paintbooth or getting LIT
View Single Post
  #3 (permalink)  
Old 01-03-2007, 08:29 PM
Mustangsaly's Avatar
Mustangsaly Mustangsaly is offline
Last photo:
Join Date: Jan 2005
Location: Nebraska
Posts: 1,071
Wiki Edits: 0

Thanks: 0
Thanked 1 Time in 1 Post
the florescent fixtures in a body shop are outside the booth with a piece of glass to isolate them between the booth & fixture. or there are explosion proof florescent fixtures. all switches and receptacles should be outside the booth. as a licensed electrician I should not say this, but in the 80s we had a 14x24 shop for a paint Booth with florescent lights recessed into the wall and not isolated with a sealed piece of glass. I was younger and braver then. they make about everything in explosion proof.

Reply With Quote