Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Line-O-Tronics two post car hoist
View Single Post
  #1 (permalink)  
Old 11-07-2004, 11:36 AM
slarsen47 slarsen47 is offline
Registered User
Join Date: Nov 2004
Location: Alberta
Posts: 8
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
Line-O-Tronics two post car hoist

I recently purchased and installed a used Line-O-Tronics two post car hoist. I rented a fork lift to install the posts. I had to change the three phase 2hp motor to a single phase 230v 2 hp motor and rewire the Furnas magnetic motor starter. It works great........

I have not been able to find any technical information about this hoist or a source of parts if and when required.

It is orange in color and uses a hydraulic cylinder on the master post and uses two cables going through the base to the slave post. It has a set of cams on each post that engage when hydraulic pressure is released to provide a fail safe locking method.

If anyone out there has seen or is familiar with this hoist please let me know.

Reply With Quote