Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Line-O-Tronics two post car hoist
View Single Post
  #9 (permalink)  
Old 12-14-2004, 07:38 PM
vinmeister vinmeister is offline
Registered User
 
Join Date: Dec 2004
Location: port jervis ny
Posts: 2
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
Line-O-Tronics Model 315

Hi
I am considering bartering for one of these lifts. It is currently a 3 phase motor with a 30 amp twist lock plug. One of the posters here has done the conversion to 2 phase 208. What was reqired and how expencive was the change over. The unit I am considering has a fully accessible and readable nameplate. It says where it was manufactured and that it is 8000 lb rated. Also the poster said that he used a forklift to position the unit. I have to break it down and transport it. Can the unit be made thinner? It is currently 12 feet from outside to outside and it might not fit in its destination garage. Also what would you estimate the units worth given unknown age and work to make it usable in my application. It seems to be working now as it goes up smoothly. I haven't tried it under load as of yet. Thanks in advance for any assistance.
Vinnie
Reply With Quote