I can't seem to find anyone who sells complete bench seats for a 1951 Chevy truck. All I can find are covers or new recovering kits....but no complete benches. I have newer style S-10 buckets so I need the complete set up.

You pro's have any ideas?

Any help is greatly appreciated!
Thanks
Jimmy

I'm going to move your post to General Rodding Tech as well as leave it in the interior forum. Maybe that will work for you.

Dan

__________________
__________________________________

No one lives forever, the trick is creating something that will.
__________________________________

Place a Wanted ad in the Classifieds on this site...maybe you can find one that way. The ads are free. Also you can check with Teas...www.teasdesign.com

OK, I'm a little confused. You're looking for an original bench for a 47-54 first series pickup but you have an S-10 bucket seat setup. Which do you want to use???

Certainly is a revolting development..but if it were me I would look for a bench seat from a small pickup of some kind..Might even find one that is decent and only needs some kind of seat cover..

Down to the local pick-a-part we go we go..

Sam

__________________
I would rather make it work than make it popular..And if it does not work it will not be popular..

this is buggmann i have a almost new bench seat
it came out of my 51 chevy truck
im not going to put it back in
the color is black

Excellent. Gainsville is only about two hours away from me. Check your PM.
Thanks,
Jimmy

Centerline, I'm going to use the old bench. I have a S-10 in it now, very comfy with armrest and all but I like the looks of the older one.