Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Looking for a table...
View Single Post
  #1 (permalink)  
Old 11-10-2004, 07:27 PM
iiibdsiil iiibdsiil is offline
Member
 

Last journal entry: Transmission Table
Join Date: Jul 2004
Location: Tampa / Boca Raton, FL
Age: 28
Posts: 46
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
Looking for a table...

Okay guys, I am looking for a table for my shop.

Basically, what I want is a metal table, that will like a 3 inch lip all the way around, that I can ship up on 3 corners, and drill a hole in the lower corner, so I can tear transmissions and whatever else that will be liquidy, so all the fluid runs out the hole and into a bucket.

We have one at work, dealership, and apparently Grainger has them, but I am unable to find on their website.

If you need me to draw a picture, I could try, but I am hoping someone will have an idea what I am talking about.

Also, by 3 inch lip, I mean basically a 3 inch wall all the way around, not a recess. And all the way around means the 2 short sides, and only one long side.

Thanks in advance.
Reply With Quote