Hot Rod Forum banner

lug bolt pattern and such

2K views 3 replies 3 participants last post by  5.0Towncar 
#1 ·
Anyone know right off hand what the bolt patern and the backspacing is on an 88 Towncar? I don't understand how to measure the bolt pattern. If I measure it from the center of the bolt it says 4 1/2 and if I measure it from outide of the bolts it measures 4 3/4. Also what is the backspacing? By the way, my rims are 7 inches wide and I plan on going to 8 inch wide rims. Should I change the backspacing?????
 
#4 ·
Cool thanx. What should I do about backspacing on the back wheels? my factory tire size is 215/70R15, and I am using 235/60R15. Same heighth but about an inch or so wider, and there is about 1 and a half inches between the inside of my tire and the frame. Should I make the rim stick out an inch more? If I did I don't think it would hit the fender. Besides I got air shocks if it is to close. God I feel retarted. <img src="graemlins/drunk.gif" border="0" alt="[drunk]" /> <img src="graemlins/drool.gif" border="0" alt="[drool]" />

[ November 18, 2002: Message edited by: 5.0Towncar ]</p>
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top