Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Maintaining Professional Tools
View Single Post
  #25 (permalink)  
Old 12-27-2008, 10:57 AM
speedydude's Avatar
speedydude speedydude is offline
Registered Cruiser
Last photo:
Join Date: Apr 2007
Location: Sedona, AZ
Posts: 271
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
Originally Posted by OHD
Snap On has recently made a decision to make a judgment call as to used tools ownership and will never deny warranty to the origional owner. If you did not buy it new they may not replace it. If you have other Snap On tooling they rarely deny exchange. This was done because some of the warranty return items Snap On was scrapping, were showing back up on Ebay for sale. Snap On always puts a "grind mark" on the origional replaced tools and the ebay sellers were listing them as "grind marks destroying the origional owners id" marks.

In the example above with the guy using the pipe on a ratchet, to extend its strength, that is why Sears has to make their tools physically bigger, so this type or idiot does not kill himself or some close.
Interesting to know, as was the written complaint remark.

I think we've all used a cheater bar at times. The longer the bar you're using...........look around at what you're gonna hit, because something's gonna break loose..........
Reply With Quote