Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - manual choke
Thread: manual choke
View Single Post
  #2 (permalink)  
Old 09-11-2004, 02:32 AM
lowROLLERchevy's Avatar
lowROLLERchevy lowROLLERchevy is offline
... & Insanity Ensues .....
Last wiki edit: The FREE T Bucket plans Last photo:
Join Date: Jan 2004
Location: Western NY
Age: 37
Posts: 937
Wiki Edits: 22

Thanks: 0
Thanked 3 Times in 2 Posts
edelbrock says that the 2101 intakes "accept late-model choke's", meaning that you can hit the junkyard or the parts conter to pick up a matching choke assembly

looking through the edelbrock site, i see the mechanical joke that bolts to the intake ... but its only listed under q jet parts, so im not sure if it will work on the performer series of carbs. all depends on the angle that the choke arm is at on the new carb

ask your local performance parts shop, or call the jegs or summit tech lines, the last time i called jegs, it became a 1/2 hour bench race session, those guys love cars and it shows
Reply With Quote