|
|
|
04-06-2010, 09:20 PM
|
||||
|
||||
|
Manual to Power doors swap 1990 k1500 4x4
I got me a set of power doors for $100 because my manuel doors are shaved. Is there a wire harness I can buy to make this swap easier? If there is, where does it hook upto?
|
|
04-06-2010, 09:40 PM
|
|||||
|
|||||
|
bone yard time
time to go to the wrecking yard. some times the power door harness was an overlay that was tie wrapped to the main harness.On most newer vehicles the options are included in the main harness. depending on the yard the prices vary . A couple of years ago My son helped out a friend that was chrushing cars when the steel price was up. sledge hammer . crow bar and tree pruners and the harness was in the copper recycle trailer in about 2 minutes . If you have to cut up the harness it can be a pain to trace everything out to get what you need.
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 1990 k1500 4x4 with shaved door handles-I hate them. | Chevy350Sb | Body - Exterior | 10 | 04-06-2010 04:23 PM |
| Looking for 1985 chevy k-10 wiring diagram for power doors and windows | Jobo62 | Electrical | 7 | 11-20-2006 05:45 AM |
| Fiberglass Doors w/ working power windows | clarkoh | Body - Exterior | 2 | 09-07-2006 09:54 AM |
| 4x4 85 ranger windsor swap and need to change tranny | gothrod87 | Transmission - Rearend | 4 | 03-27-2006 08:29 PM |
