|
|
|
10-10-2010, 10:26 AM
|
||||||
|
||||||
|
master cylinder adapter
I am planning to change 67 mustang drum/drum 1" bore master cylinder to the popular 74 maveric or 78 granada 15/16" bore master cylinder.
Master cylinder female port is 7/16x24 inverted flare. Brake line male nut is 9/16x18 inverted flare. Anyone know part number for the master cylinder adapter nut? 
|
|
10-11-2010, 11:46 PM
|
||||||
|
||||||
|
I will just keep my 67 drum/drum mc for my disc/drum conversion.
No more need for mc adapters.
|
|
10-13-2010, 12:53 AM
|
||||||
|
||||||
|
So you need 2 fittings like in this Pic? >> http://www.rockauto.com/catalog/moreinfo.php?pk=309132
Are you using Manual Disc/Drum setup?
|
|
10-13-2010, 01:08 AM
|
||||||
|
||||||
|
Maybe >> http://www.rockauto.com/catalog/moreinfo.php?pk=585578 expensive fitting.
|
|
10-13-2010, 08:37 AM
|
||||||
|
||||||
|
Quote:
I need 9/16" female and 7/16 (std 1/4 tube threads) male. Many people have done this MC swap but apparently no adapter available. Don't know what they used. Can use an adapter tube, make your own tube, or possibly rig up a flex hoes. Every pic I googled of DIY bent MC brake line was sub par. I choose to use the drum/drum MC for my disc /drum conversion.
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Clutch master cylinder G-Body T5 swap | greenmoonshine | Transmission - Rearend | 4 | 05-07-2010 06:37 PM |
| Master cylinder without booster? | Rons1stRod | Suspension - Brakes - Steering | 16 | 11-05-2007 09:06 PM |
| 39 Deluxe master cylinder adapter? | MM in NM | Suspension - Brakes - Steering | 4 | 09-30-2005 03:42 PM |
| Single to Dual Master Cylinder | swazo | Suspension - Brakes - Steering | 2 | 10-19-2004 08:00 AM |
| Confusing master cylinder ports... | Externet | Suspension - Brakes - Steering | 2 | 12-08-2003 08:18 PM |
