Welcome To Hotrodders
Tech Help
General Hot Rod Forum Discussions
Knowledge Base
Marketplace
Vendor Member Section
Want to Grow Your Business? Learn more about becoming a Supporting or Premium Vendor
Latest Posts
-
1950 Ford Shoebox Resto-Rod I need to cut out a section of my trunk floor about 12"x12" to gain access to replace the fuel tank sending unit, which is on the top. This is a custom car and the previous owner/builder tack welded a bracket from the tank to the body. So dropping the tank is not...7 replies 113 views
-
Our old family mini van. 2000 Ford Windstar 3.6L The starter on it died. I confirmed. I bought the cheapest starter I could find. The first time I went to start the van, a horrible grinding sound came out. Its obviously the starter gear on the fly wheel. I thought I did something wrong...9 replies 112 views
-
I have a 383 with Dart iron eagle heads, Comp Xtreme 230/236 Hydraulic Flat Tappet Cam, Holley 750 double pump with a Victor Jr open manifold. The engine winds up quickly. It is a 5 speed street car. I'm wondering if an open spacer or 4 slot spacer would be a benefit. I wish it was a dual...15 replies 441 views
-
I've been driving this car for a while and finally want to deal with the noisy lifters on the Chrysler 413 engine, basically this car an Hydraulic Lifter Adjustment that I want to do myself. And I'm not sure what the best way to do it is. Some say you should adjust each rocker when it's at its...1 reply 52 views
-
Got a 72 Nova that someone swapped a 350/350 into at some point. It's a 10 footer car that's really nothing special except that it's mine. I've had it since 2021 and I basically overhauled everything that I possibly could so far. It's riding on new suspension up front and out back, new...0 replies 24 views