Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Model A engine transplant, drivetrain elignments
View Single Post
  #4 (permalink)  
Old 08-16-2008, 06:53 AM
dalesy dalesy is offline
Registered User
 
Last photo:
Join Date: Sep 2007
Location: Mississippi
Posts: 357
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
What was previously said, should apply here, since it is not a race car. Many times in the past, we would put the vehicle on jackstands, or on blocks, to where it is sitting at ride height. Then, lay a steel rod or piece of conduit on top of the tail housing back to the top of the yoke at the rear end. If it was fairly straight, that was good enough. Never had a failure. Some 'purists' have become over sensitized by details....
Reply With Quote