[Stangman196700]

i have a 67 mustang with front clip damage to the radiator support, front crossmember and side apron. I was wondering if taking off the whole front clip is something i would do with a grinder or if its a bolt on front clip. im more of an engine guy then a body man. I can get a good front clip from the junk yard for 300 and think this alternative would be easier and cheaper then doing the welding work on the supports,apron and crossmember.

Thanks
Jose

[project66]

not sure on the 67, but if it is like my 66 which i think it is, then all that stuff is spot welded together

[adtkart]

All inner structure on all of the mustangs was welded in. It is a uni-body vehicle.