Dimensions of Mustang II control arms
Can anyone provide some dimesnions for a set of stock or tubular Mustang II upper and lower control arms?
These would be the A-shaped lower control arm (no-strut design).
I would hope to use a strut rod in addition for added strength.
It's a long shot, but I'm exploring the option of using them with my Buick cross member and springs.
If you can furnish dimensions A, B, & C for a lower arm, that would help.
If you can furnish diemensions A & C for and upper arm, that would help.
See the attached sketch.
Thanks for your help.