Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - My 350 Chokes!
Thread: My 350 Chokes!
View Single Post
  #3 (permalink)  
Old 05-15-2002, 02:34 AM
furfman furfman is offline
New Member
Join Date: May 2002
Location: Casco, Maine
Posts: 12
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts

Thanks for the reply, I changed my metering to step 23 in my manual, per edelbrock tech support, but didn't change anything.
I said in my first post that the motor lacks power, I mean gutless, it was a rod, now it's a go-cart, can't accelerate or even make it up a hill. If I give it any more than 1/3 throttle under load, it would bog out real bad. I wonder if the timing set is wrong, I got the edelbrock set reccomended for the cam and such.
I have the exact same setup in my 351m, and never had any problems like this.
Thanks again.
Reply With Quote