Hot Rod Forum banner

My budget build 454 with procomp heads

7K views 2 replies 3 participants last post by  1932bantam 
#1 ·
I wanted to tell everyone my experience with the off shore brand heads. I have a std bore 454 with used ls7 pistons,oval port procomp heads and roller rockers both from skip white,bullet flat tappet solid cam,professional products victor jr style intake,2 1/8 headers and 1000 hp holley carb. I have made a total of 10 passes the first 4 had issues with my digital 6 msd box the next few the 850 holley i had gave me issues. My best motor pass was a 10.72@126.32 and on a 150 shot of nitrous 9.77@133.70 (with a 1.32 sixty foot). I still need to tune it, i'm pretty sure there's improvements to be made.
My car is a 79 camaro all steel except the hood,the headlights were removed and filled in,gutted interior,th400 foot brake ,4500 stall,486 gears(i think),31.25x12.25 slicks the car probably weighs 3000 pounds. I'm happy with the heads no issues so far but only have 10 passes on them.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top