Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - My spark plug colors, am I good or not?
View Single Post
  #2 (permalink)  
Old 05-08-2009, 05:22 PM
oldbogie oldbogie is offline
Registered User
 
Last photo:
Join Date: Apr 2007
Location: Seattle, Wa
Posts: 6,656
Wiki Edits: 0

Thanks: 3
Thanked 399 Times in 346 Posts
Quote:
Originally Posted by bubbahotep
Below are 2 of my plugs on a carb'd 383 stroker. These are accel 276s shorty plugs for headers. According to accel, they are HOT plugs (they claim that the last digit is the temp ranging from 1 to 8?? and these are 6). These are NON resistor with an msd6 and coil

The pics should show that the white center part is black but thiny covered and the electrode part looks lighter. Any oil that you see is from the valve cover oil that sometimes runs down when I dont seal it good

So my question is, do you think Im running ok or am I too lean / too rich / or is the plug wrong? I was thinking of going with a cooler plug with a resistor???



These plugs show either or combinations of the following:

1) A little rich

2) Plug a little too cold

3) Engine doesn't get warmed up

4) Not driven very far

5) Not driven very fast

6) Compression not high enough

Bogie
Reply With Quote