Hot Rod Forum : Hotrodders Bulletin Board

Hot Rod Forum : Hotrodders Bulletin Board (http://www.hotrodders.com/forum/)
-   Engine (http://www.hotrodders.com/forum/engine/)
-   -   need 250 inline6 help (http://www.hotrodders.com/forum/need-250-inline6-help-224735.html)

jeffreygarrett 10-06-2012 06:25 PM

need 250 inline6 help
 
im looking at buying a 1984 chevy truck c10 with the 250 integraded 6 and a turbo 350 transmission. the head on the truck is cracked and not running and im having one heck of a time finding a rebuilt head . im considering a 350 engine swap but rather keep the 6 . any and all help would be greatly appriciated .

OneMoreTime 10-06-2012 06:44 PM

Go onto car-part.com and do a search..I found lots of them but I do not know what part of the country you are in..

Sam

jeffreygarrett 10-06-2012 08:59 PM

i live in albuquerque new mexico

OneMoreTime 10-06-2012 09:10 PM

Five Js Auto - Albuquerque, NM and Pueblo, CO

These guys have one according to the website...

Sam

JeffB 10-07-2012 02:49 PM

You could get the head from an earlier 250 that had the separate intake and exhaust manifolds then you can have some fun:

BOBCRMAN@aol.com 10-07-2012 03:40 PM

Quote:

Originally Posted by JeffB (Post 1596906)
You could get the head from an earlier 250 that had the separate intake and exhaust manifolds then you can have some fun:Chevy 250 Inline Six - YouTube

Yes, you have to change everything on the top of the engine and fab linkages and exhaust. Then there is the problem of soft exhaust seats..

I can't get any later 250 heads locally for years. All the heads are cracked.

Capt.Kurt 10-07-2012 09:53 PM

I have an extra head for the inline 6 250 but its not intergrated.
I dont have a clew on how much it will cost to ship it..
Fort Myers Fl.

JeffB 10-08-2012 12:20 AM

You may want to check this place out too: Stovebolt -- Old GM - GMC - Chevy Trucks!

Mr. P-Body 10-08-2012 07:17 AM

PM me. I have one.

Jim

Capt.Kurt 10-08-2012 02:25 PM

Jim I dont know what PM means?
IM new to all this pc stuff.

66GMC 10-08-2012 02:30 PM

Quote:

Originally Posted by Capt.Kurt (Post 1597241)
Jim I dont know what PM means?
IM new to all this pc stuff.

PM = Private Message.
Click on his name in his post above, and a menu appears including "Send a private message to ..."

Highball 10-10-2012 08:55 PM

need 250 inline help
 
1 Attachment(s)
If you can find the earlier head that does not have the integrated setup you could do a lot for a little. I have one I just built for a friend and it is churning out 270 HP on an engine Dyno. The main thing is to get the head work done and use the latest technology. The head on this engine was worked over by Sissell's in West Covina. They truly know the 230, 250 and 292 Chevy inkline sixes.
Normbc9


All times are GMT -6. The time now is 05:28 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.