Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Need guidance
Thread: Need guidance
View Single Post
  #11 (permalink)  
Old 03-29-2013, 04:18 PM
thinwhiteduke's Avatar
thinwhiteduke thinwhiteduke is offline
Living In The Past
 
Last photo:
Join Date: Dec 2011
Location: Downunder
Age: 54
Posts: 413
Wiki Edits: 0

Thanks: 35
Thanked 33 Times in 30 Posts
Quote:
Originally Posted by Summit77 View Post
Diesels are so much easier haha. Ok so compression and duration are important got that part now. So 454 with 10:1 compression is good?

....with a camshaft duration of 227 - 230 degrees at .050" lift. This is a basic guide. There is much written on the subject.
Here's a couple of links to articles that explain things a whole lot better than I can.

http://www.crankshaftcoalition.com/w..._compatibility

http://www.crankshaftcoalition.com/w..._relationships

http://www.crankshaftcoalition.com/w...ose_a_camshaft

Hope this helps.


Duke
Reply With Quote