Hot Rod Forum banner

need help with ford 302 head

910 views 2 replies 2 participants last post by  speedbump 
#1 ·
in the back of the 302 ford head there is ports for the air pump they hole's are threaded what are the thread size are they a 5/8 nc hope that some one can help with this thank's
 
#3 ·
There are also inserts already made out of stainless that are threaded on the outisde(5/8) and on the inside(7/16 I think) so you can use the hole for accessories. full line auto parts stores carry them since Ford used them to block the end that didn't use the air pump. The extra attaching point comes in handy sometimes.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top