Hot Rod Forum banner
Status
Not open for further replies.

Need Hurst shift lever #3712

1K views 6 replies 5 participants last post by  AutoGear 
#1 ·
hey,
I am looking for a replacement Hurst shift lever for my Muncie 4 speed. Lever is approximately 10-1/2" long and #3712 I believe. The chrome on mine is sub par and I would like to replace with one in better condition. Threads need to be 3/8 - 16 to work with my shifter ball. Anyone have one or idea's to rework the one I have now (other than re-chrome which is $150 min. plus shipping)?

Thanks,
 
#7 ·
If you're feeling thrifty, wire wheel it and polish it; then spray with a clear coat.
You'll have to touch it up every couple years. If you want it plated; buff it out extremely well and ask a chrome shop about their nickel plating. It should be cheaper. Although copper would look cool if you put a clear over it, or a good coat of wax
 
Status
Not open for further replies.
You have insufficient privileges to reply here.
Top