|
|
|
03-04-2002, 07:48 PM
|
||||||
|
||||||
New 5.0 Liter Ford
Does anybody know about how much power this will make??
*302 block *Ford Motorsport E303 roller cam (D: 220 @ .050 intake&exaust, L: .498 intake&exaust *Stock pistons *edelbrock RPM heads (1.90/1.60) *crane 1.6 roller rockers *9.5:1 compression *Edelbrock RPM manifold *Edelbrock 600 cfm carb * K+N filter * JBA shortie headers * 2.5" flowmaster exaust * NO smog equipment Any advice would be helpful. Thanks. [ March 11, 2002: Message edited by: mustang66maniac ]</p> 
|
|
03-05-2002, 01:01 PM
|
||||
|
||||
I have that exact same setup in my 86'capri but with hooker headers,steeeper cam weidland 6-71 blower that makes a dyno proven 731hp with nos
good choice 86'capri
|
|
03-05-2002, 07:04 PM
|
||||
|
||||
I'seen combos simalar to this before that were in 300-350HP range I'm guessing that the lift of your cam is.303" . if you steepen the lift you should be able to boost your HP even more
|
|
03-06-2002, 08:10 AM
|
||||||
|
||||||
The specs on the cam are... duration @.050 is 220 for intake and exaust. Lift is .498 for intake and exaust. (with 1.6 rocker arm) Hope that helps.
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
