Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - New cam/won't start
View Single Post
  #7 (permalink)  
Old 05-29-2002, 08:21 PM
4 Jaw Chuck's Avatar
4 Jaw Chuck 4 Jaw Chuck is offline Moderator
Last photo:
Join Date: Mar 2002
Location: Manitoba, Canada
Age: 47
Posts: 5,507
Wiki Edits: 0

Thanks: 22
Thanked 274 Times in 186 Posts

The piston should be at TDC in compression on #1 when aligning the rotor to #1 cylinder, the cam will be fine unless you are running Nascar level springs and a 600+ lift cam. If you are, pull the cam and relube before firing it up.
Outlawed tunes from outlawed pipes
Reply With Quote