New paint bubbling

baddbob · #31 (**permalink**) 04-15-2005, 05:26 AM

Quote:

Originally Posted by cboy

Do you hand block at this point or use your DA?

Yeah, All of my final sanding is done by hand. Air sanders are for rough in work or just fast material removal IMO. Taking your filler work from 180 grit scratches to 320 is only a few minutes of work, you can also apply a guide coat to make sure nothing is missed. Bob

garretthes · #32 (**permalink**) 04-15-2005, 06:11 AM

The etching primer dried for several hours and was sanded prior to priming.
Just a reminder.......
I cut open 1 of the bubbles and discovered it was the spot putty. The red stuff had plainly expanded between the primer and the body filler.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
"Basic of Basics" Can I use "rattle can" paint on my car?	Centerline	Body - Exterior	33	07-08-2011 12:33 PM
Sherman Williams Clear Coat Failing < 3 Years?	DeJarnett	Body - Exterior	33	12-11-2005 10:39 AM
New Paint is bubbling	garretthes	Body - Exterior	3	03-23-2005 10:39 AM
Looking to paint my car with OEM quality finish. Have some Questions	Gro Harlem	Body - Exterior	12	01-15-2005 06:31 AM
Need color/top ideas....	Cracker Red	Body - Exterior	4	09-07-2004 08:14 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)