Hot Rod Forum : Hotrodders Bulletin Board

Hot Rod Forum : Hotrodders Bulletin Board (http://www.hotrodders.com/forum/)
-   Hotrodding Basics (http://www.hotrodders.com/forum/hotrodding-basics/)
-   -   New two-barrel Berry Grant carb? (http://www.hotrodders.com/forum/new-two-barrel-berry-grant-carb-26464.html)

tm454 10-25-2003 01:12 PM

New two-barrel Berry Grant carb?
 
Anyone planning to run this beast? Looks really good and will make a great add on to a Rod project. I am planning on adding a Speed Demon to my 65 Chevelle, any shared experience with either one of these carbs would be appreciated. Or, how about a 174 Roots blower by Weiand, any one running that setup?? I am just looking for info on these bolt on HP additions.


Todd


Rar Rods Rule!

bullheimer 10-28-2003 01:43 PM

never heard of bg making a two barrel yet. must certainly be for a 3 dueces set up i would think.

jamnut 10-31-2003 07:12 AM

I'm running a 750 Speed Demon right now. I love it, but they are kinda hard to get tuned right if you didn't get the correct carb for the job. We had to do a few modifications to my carb to get it all dialed in. Before getting one of these carbs it's good to call Barry Grant Tech and tell them about what setup you plan on running mainly your cam specs and they will hopefully give you the correct carb to run.

My cam had a little to much duration for the speed demon and we had to basically turn it into a Mighty Demon to get it tuned right. It's nothing that I wasn't prepared for because I've read alot about the Demon's after I got mine and new what to expect. Once it's tuned it ran perfect, it's a very good carb and looks great too.

tm454 11-30-2003 07:13 AM

Berry Grant-Road Demon jr.
 
Thanks for responding jamnut. I was reading the Summit catalog about the 4brl Road Demon 525cfm and 625cfm and 725cfm carbs. I was looking for information on the new 2brl carbs but haven't found any either?? Saw an article in one of my car mags. but haven't found it again? I'm running a 350 stroked with a 400 crank, flat top pistons and 525 duration on the roller cam? I am used to running the stock configuration cam and this set up confuses me, I don't want to try and run the wrong carb to begin with.


Todd


Rat Rods Rule!

hotwheels55 11-30-2003 09:09 AM

http://www.barrygrant.com/

RedRocket 12-01-2003 03:20 PM

Here's a little bit of info.

tm454 12-06-2003 09:37 AM

Thanks guys, I still haven't found that article on the 2 brl carb again??? Thanks Red that looks like the same info.


Todd


Rat Rods Rule!

adb2f 12-07-2003 08:44 PM

man, I've seen that ad somewhere too. Or maybe it was on Horsepower TV or something. I would be a cool 3duece setup though.


All times are GMT -6. The time now is 11:40 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.