|10-19-2008 10:47 AM|
All of the 2WD out put shafts I have seen on a 4L80E , they are all bolt on style shafts.
The 4x4 shafts are different.
The E brake tail housing design of the 4L80E will require the whole tail housing , brake and yoke.. these parts are all application specific.
This brake assembly is quite large diameter and may not easily fit under the floor of most cars.
|10-19-2008 09:41 AM|
|10-19-2008 08:03 AM|
I already have the 4L80e trans.
Does anyone know where I can get the tailshaft that has the mechanical parking brake assembly?
What is it actually called, any pictures, etc.
|10-18-2008 11:47 AM|
|curtis73||Look to hummers and HD trucks. They had them.|
|10-18-2008 10:20 AM|
I'm now planning my parking brake installation for a street rod project with a 4L80e.
I wanted to avoid running brake cables to rear calipers and I was told that motorhomes had 4L80e transmissions with a brake assembly mounted to the trans tailshaft.
Is this something to consider so I can connect to a gennie or lokar floor mounted emegency brake handle to the trans.
Thank you for your help.........