Hot Rod Forum banner

HF 43430 Users

1K views 4 replies 4 participants last post by  fireboat 
#1 ·
My Harbor Frt 43430 gun came with a 1.4mm tip. I cannot find any optional size tips/nozzles on HF website. Does anyone know if they are available?
Does anybody else have different sizes? I like how this gun sprays, better than the DeVilbis Finishline I have. But I would like to shoot Urethane surfacer with it, so I need at least a 1.6 (prefer 1.8) for my Omni MP 182 according to the spec sheet.

chas
 
#5 ·
I ordered a 1.9 also from HF but it was very poorly machined as it dripped real bad with the trigger closed. Unfortunately I didn't get around to using it for quite a awhile so I didn't bother trying to return it. The needle was straight and the nozzle looked ok, they just didn't mate well together. Hopefully, you will have better luck.
Overall I have really had no complaints with the 43430 with the std 1.4 though I rarely use the gun anymore as I have acquired better ones now.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top