|03-13-2009 09:54 PM|
on the maxus welders I will say they are great welders I have the maxus 140 and it has been great very happy with this product. we use this welder here at our shop and it has performed great. the torch seems to be better quality then the torch on my hobart.
|11-24-2008 07:56 AM|
|HalfOunce||It pays to shop around.... First thing is kind of get an idea what new ones are going for from various places. Like said above i would stick with name brand. I would also get out a few phone books and see if there is any welder repair shops around the area. Reason i say that is a few years ago when i spent about 2k for a miller 251. Like 2 weeks later a welder repair man walked into my shop n had like 8 miller 250's for 800.00 ea. With the way the economy has been it should not be very hard at all to find a nice used machine. If your boy friend is like any other guy out there. Then his first suggestion is probably the one he wants heheheheheh......|
|11-24-2008 07:14 AM|
EmmaRose (that was my mother's name by the way, but first and middle, not one word),
Also be sure you are comparing apples and apples when comparing prices etc. Besides wanting a 220 welder, you might check with your BF as to the amperage he wants in his dream machine...which will be based a lot on how thick of metal he wants to work with. For most hobbyist/car builder, something in the neighborhood of a 175 or 185 should be quite adequate...but a double check with the gift-recipient wouldn't be a bad idea. Migs vary all over the place in terms of total amperage...and thus total cost. So just make sure you are looking at similar capacity when you are shopping.
You also might want to be aware that different machines (even the name machines) can vary in how they control the amperage and the wire speed. Miller, for example, has unlimited amp and speed controls while others you might see on the market are limited to 4 or 5 specific settings on the dial. Again, your BF may have a preference and that might make a difference in the machines you want to eliminate from the search.
There are a number of good threads regarding mig welder choices on this site. Just click the "search" feature (above, near the top of this page) and enter some appropriate search terms.
|11-23-2008 06:14 PM|
|scotzz||I just pulled the trigger and bought a new Lincoln 180T from Harris Welding(who is listed on this thread)............$200 off list, free delivery and 3 day delivery..........|
|11-14-2008 09:37 PM|
|1930u||I'm using a 25 year old Lincoln that I bought used. It's a wonderful machine. If you can afford it I would stay with the brand name.|
|11-07-2008 10:27 PM|
I have and they are a good outfit..
|11-07-2008 09:25 AM|
Anyone have experience purchasing through www.welders-direct.com?
They have a sale on Lincoln, Miller and Hobart with free shipping.
|10-28-2008 06:39 AM|
Exactly what I was going to post. I have used a few of them and absolutely love em. When I finally need a welder of my own, you can bet your butt its going to be a HH187!
|10-23-2008 02:28 PM|
Miller, Lincoln or Hobart and even though my personal favorite is Lincoln the Hobart Handler series is hard to beat for the cost. Miller is good also but most have a few more bells and whistles that are nice but not necessary so the cost is a bit higher.
That link is just an example of a good machine with features such as you described and if you shop around you should be able to beat that price some.
|10-23-2008 02:08 PM|
|TRAILERKING||Miller or Lincoln for sure. You get what you pay for. Miller even has auto voltage sensing for more versatiliy when powering up.|
|10-23-2008 02:03 PM|
|metalmeltr||just googled maxus the welders look like crap.|
|10-23-2008 01:59 PM|
|metalmeltr||Your boyfriend is very smart and clearly knows what is good take his advice and run with it.|
|10-23-2008 12:15 PM|
Check this out on Ebay. They are a very good company to deal with. I buy quite a bit from them. Call them up and ask to speak to Larry.
|10-23-2008 11:57 AM|
Local weld stores around here sell them for around $1900. It would be the last MIG you'd ever want to buy.
|10-23-2008 11:31 AM|
An unknown or 'no-name' is somewhat of a gamble -- you decide how much to bet that it will work and last long enough to be a payback.
I spent $160 on a Harbor Freight "reconditioned" 220V MIG and have no complaints. I don't weld every day or even every week, but if it quit today, I feel I've gotten more than my money's worth out of it. It has tripped its thermal overload only once (the duty cycle varies according to how high a setting you're using). I've welded material ranging from sheet metal thinner than the typical car body to 3/16" thick. (I prefer to use my stick welder for heavy stuff).
My neighbor runs a 'dozer and backhoe service. He has a fairly heavy duty Miller with a 100% duty cycle at all settings. He's welded material ranging from sheet metal to over 3/4", including refacing the teeth on a trackhoe bucket. You'd have to fight him to get it away from him. Bring lunch; he's pretty wirey.
I gave away a 110V Lincoln Handy-Core (wire feed but not MIG) after buying the HF. Watch out for little "consumer" welders like that -- they're ok for fixing lawn chairs and maybe a mower deck, if you practice enough, but not fit, IMO, for working on a vehicle.
|This thread has more than 15 replies. Click here to review the whole thread.|