|02-18-2009 04:23 PM|
32 ford questions
This has been the best site for the old stuff I have found.I am new at the old stuff to. Can anyone help me with finding a 1932 Ford coupe frame? Me and my 8 year old boy love the looks of these cars so we are going to give it a shot at building one. I have a 30 or 31 frame now. I will have alot of questions about this type of build. Thank you kindly in advance
|10-05-2002 11:35 PM|
Well thanks a lot, everybody, I am sure its a '32 and good to know 33, 34 rears will work, that makes it a little easier to find 'em I'm sure.
|10-05-2002 02:49 PM|
Wow i like this site, now i've just found out 32's had fenders....something new every day.
|10-04-2002 02:20 PM|
I am sorry, there is one other thing. The designation "truck" used by Ford usually refers to 1-ton and up. Sometimes what fits a "truck" doesn't fit a "Commercial" or "Pickup". Kinda confusing but a necessary bit of knowledge.
Example: a 42-47 Truck front fender looks just like a pickup fender until you buy it and bolt it on your pickup and find out it has tire tread to fender lip clearance big enough to stick your head in.
|10-04-2002 02:13 PM|
The 32, 33, and 34 Ford Pickups are the most incorrectly identified trucks in the Ford line.
Lots of guys think they have '32s because the title says so, or the previous owner said so, but oftimes they are wrong and have '33s or '34s.
The '32 is unique to itself in many respects.
The front fenders and runningboards(rubbercovered, an oddity in Ford pickups as previous and following all had stamped diamonds) are the same as passenger cars.
The rear fenders are 32 only but...you can use 33-34 pickup rears too.
The frame is the one-year only '32 Pass. and Pickup with the beauty-mark reveal pressed into the siderails and a K-type center crossmember.
The 33-34 has plain siderails and an X-member similar to the later cars and trucks.
I highly recommend you acquire all the lierature you can find on the 32 pickup, and read it.
Glad somebody is still playing with real old cars, just wish the mags and other media would research their stuff better...
|10-04-2002 07:39 AM|
|Shawn Asseln||Trucks are generally a year behind the cars in term of body styles. I have worked on 32' trucks that parts from a 31' model A fit. Make sure to check your body style first.|
|10-03-2002 01:43 PM|
Not off hand I don't, but give me a few hours and I'm sure I can locate a business, or another one of these fine ladies and gentlmen on this site could direct you to the right direction.
|10-03-2002 11:44 AM|
Thanks halloweenking and im sure i'll need your help again in the near future. Or right now do you know where I could find truck running boards?
|10-02-2002 11:54 PM|
Yes I do beleive the car fenders and truck fenders are identical, but the running boards may be longer, not positive on that since the '32's I've customized were either fenderless or I had to make custom fenders for a better look. I do beleive all bolt on peices of the early fords of the same model were identicle so they could be replaced by parting out other broken vehicles, simular to the jeep used in WW1-2. Welcome to the hotrod world, I to was once a lowrider builder. Let me know if you need anymore help, be glad to do what I can.
[ October 03, 2002: Message edited by: Halloweenking ]</p>
|10-02-2002 11:49 PM|
'32 ford question
I've been looking for a lot of parts for my '32 ford truck but all I can come up with are '32 car parts. Can I use these parts? Mostly interested if the fenders will fit. This will be my first street rod, have been building low riders and race cars for years,but no experience with the older stuff. Thanks in advance.