|04-03-2009 04:13 PM|
|matt167||I bought a kit from Ezboy Rod interiors for my '51 Chevy. entire kit, ( headliner, windlace, extra vinyl, door panals for a 4dr, and 2 bench seat covers ) cost $1,650. I have not installed it yet, but everything was put togther very nice, shipped well. and Joel is nice and helpful. I'll have to check my paperwork, but the warranty is pretty good too|
|04-03-2009 03:22 PM|
|DanTwoLakes||So offer him some type of barter involving your own labor. Tell him you'll take it all off the frames and take it apart for him. Tell him if he lays it all out on the fabric that you'll cut it out for him. You should be looking at around $1200 ( $375 for each bucket and $450 for the rear seat) using good fabric. He may knock off a couple hundred if you do enough labor for him. Yes, that's more than EZ Boys, but I'll bet you'll be a lot happier with the finished product.|
|04-03-2009 03:11 PM|
|04-03-2009 02:34 PM|
Dan's correct about contacting a local shop. I own 2 cars with interior from one of the "leading manufacturers" & it is splitting down some of the stitch lines after 10 or 15 thousand miles. Some of that "wonderful expanded vinyl".
|04-03-2009 12:55 PM|
|DanTwoLakes||That is not very much for all of that. I would be a little leery as to the quality of the vinyl they are using. There's really no way to know unless you try them. Have you gotten a quote from an upholsterer?|
|04-03-2009 12:13 PM|
|04-03-2009 11:34 AM|
If they actually do what they say they do, their quality is probably pretty good. $650.00 for a vinyl front bench seat is not inexpensive. Why not let a local upholsterer do it, it probably won't cost you any more?
What car are these seats from? Do you have the old seat frames and any of the old seat covers? If you do, re-pad the seats, and do not buy the seat re-padding kit from them. There are much better ways to pad a seat than with cotton batting and burlap. CLICK HERE to see how to do it with modern materials.
For $700, I'll do a front bench seat in 100% polyurethane (like Ultraleather) any way you want and re-pad the seat in the process. Then it will look like this. The first picture is the rear seat. The front seat cover was almost nonexistent.
|04-03-2009 08:34 AM|
EZ Boys interior products, Quality??
Has anybody ever bought or knows someone who has bought or installed EZ Boys seat covers or any of their products???