Hot Rod Forum : Hotrodders Bulletin Board - Reply to Topic
Hotrodders.com -- Hot Rod Forum



Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
Hot Rod Forum : Hotrodders Bulletin Board > Tech Help> Engine> Safe oil level?
User Name
Password
lost password?   |   register now

Thread: Safe oil level? Reply to Thread
Title:
  
Message:
Trackback:
Send Trackbacks to (Separate multiple URLs with spaces) :

Register Now

In order to be able to post messages on the Hot Rod Forum : Hotrodders Bulletin Board forums, you must first register.
Please enter your desired user name (usually not your first and last name), your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Additional Options
Miscellaneous Options

Topic Review (Newest First)
04-08-2009 10:23 PM
jtybt15 OK Thanks guys. I was wondering what would be a safe level to fill to. More careful measuring showed the windage tray is only 1/2"(without gasket) below the lowest counter weight so I'll mark the 'full' just a tad below the tray. That way, when I fill the sump, I can tell exactly how much it holds.
04-08-2009 05:38 AM
cobalt327 How close to the bottom of the sump is the pick-up?

If it's the usual 1/4" or so, if it were me- and I was using a deep sump pan to reduce windage of the oil and not to protect against oil starvation due to loss or leakage- I would run 5 qts. in the pan (filter full) and call it good. Mark the stick at that level.

If you want to run all the oil that you can possibly fit, keep the oil level w/engine off for =/> 1/2 hour just below the windage tray. I wouldn't go over the tray unless this was needed in order to fit at least 4 qts.

I would add that IMO there's no advantage in running a deep sump pan full of oil. It extends oil change intervals, and takes longer to warm up to operating temp. Otherwise it would be the same as running a stock pan.

EDIT- Sorry pepi, I was typing when you posted.
04-08-2009 05:30 AM
pepi Here is the way I would go about it, using simple common sense and some old school math ..

Is the pan 4 quarts or 6 ................ ready for the formula ?

Pour in the proper amount ........ the pans capacity. Go play a video game or watch some TV, and allow all the oil to settle / drain into the pan, heck wait a day to make sure all your oil molecules are present .

After waiting the proper amount of drain time, insert the dip stick . Remove and observe the oil level. Go too the work bench , note the location of the oil now mark the stick, exactly where you see the oil and the clean area meet... will need something other then a sharpie for the marking process ..
04-08-2009 04:37 AM
jtybt15
Safe oil level?

Did a search but couldn't find anything specific.

I'm trying to find out where to mark my dipstick for the 'FULL' mark. Basically, just how close to the counter weights is a safe oil level.

Not that it matters but...

This is a 406, the sump is 8" deep. The integrated windage tray is 3 1/2" from the pan rail(bottom of the block) and the crank sits about 2 3/4" below the bottom of the block or about 3/4" from the windage tray.


Thanks,
Charlie

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -6. The time now is 01:44 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.