|07-17-2009 08:39 AM|
Yes reapply the SPI epoxy to those areas. The SPI can be feathers if need be then apply your sanding primer as suggested.
|07-17-2009 05:29 AM|
|sunsetdart||If you have bare spots, I would put a light coat of the SPI on those spots, then coat the whole vehicle with the 2K|
|07-17-2009 12:27 AM|
Spray after filler work?
I sprayed my SPI epoxy over my stripped and DA'd metal. Now I applied my filler and did my body work. Now I have nice smooth filler and metal spots from where I sanded the epoxy. Do I apply one more coat of epoxy over everything before I apply my 2K primer? Thanks.