|08-27-2009 07:09 PM|
|08-27-2009 07:04 PM|
|08-27-2009 06:35 PM|
|Jon||Added this info into the Sanding wiki article.|
|08-27-2009 06:06 PM|
|1Bad406sbc||I would go with a dynabrade, or a hutchins. Both are VERY good sanders.|
|06-07-2009 06:21 PM|
|jss||thats true.. most tools call for 30 sec run time after oiling|
|06-06-2009 11:40 AM|
Use common sense! remove the disc,oil the DA away from your work,run for a minute,wipe it down,reattach the disc and go to work.The best way to screw anything up is to hurry,hurry,hurry ,take your time and do it right.
|06-06-2009 11:11 AM|
|jss||thanks for the info guys big help|
|06-06-2009 01:26 AM|
that's the same thing i do. i hate it when you add a few drops to many. then when you use it shots all over the place.
|06-01-2009 05:45 PM|
|deadbodyman||"hutchins"the best sander on the planet.but I bought a ingersol rand at Lowes for 100.00 thats pretty darn good,not hutchins good but very good its light too|
|06-01-2009 11:21 AM|
I think I decided to go with the dynablade
silver supreme. is 3/16 good spec to get?
|05-31-2009 01:18 PM|
|jss||wow good to know. so the vibs are ok pretty smooth to use?|
|05-31-2009 12:58 PM|
I have had a few da sanders through the years and wanted to add the smoothest and lightest in my box is a Dynabrade 6 inch. I have oppted not to oil it since new figuring if it dies or locks up it will have been worth not getting oil out the exhaust onto a panel causing a fisheye.
More than ten years of daily use with no tool oil in it at all...
|05-31-2009 10:22 AM|
this the one I have should be just fine for most da's
what about brands like DynabradeDYNALOCKE?
for hutchins looks like this is the only model for palm style da. is this what u all are talking about?
|05-31-2009 12:43 AM|
One thing to keep in mind is any air sander will use a lot of air and you might want to post the compressor you are using to help in that choice,constant stopping and starting can be a pain.
|05-30-2009 11:32 PM|
|oldred||You asked what's the best DA? That would be the Hutchins but there are some less costly DAs out there that will get the job done just stay away from the Harbor Freight types. If you want the best most reliable DA then check out Hutchins.|
|This thread has more than 15 replies. Click here to review the whole thread.|