|12-19-2009 05:11 PM|
|2old2fast||perhaps I should add this a 6" rod motor [piston pin up in the oil ring] .yes , rotella t[supposed to have more zddp ?!|
|12-19-2009 05:02 PM|
|DoubleVision||I hope you meant conventional oil. If your running synthetic now it could be it`s not broken in well enough. I break mine in the first 3000 miles with conventional oil before going to synthetic. If you did the break in with conventional disregard this post.|
|12-19-2009 03:02 PM|
15w40 w/comp break in for first 500 mi. used mainly as a cruiser @23-2400rpm k-b claimer pistons -grant rings [cast] no idea what finish however,machine shop has good rep and they had rings. thanks engineczar,thats exactly what I meant.
|12-19-2009 02:52 PM|
|12-19-2009 01:33 PM|
How fast dies number 2 take to arrive at 80 pounds?
388, I presume is a .060 over bore on a 350 block. That begs the question what is the block?
Have you checked the cam for a wiped lobe, like at number 2?
Who's heads? If they were rebuilt, did the guides get refreshed?
What are the piston's and rings?
Do you know what finish was put on the cylinder walls?
|12-19-2009 01:30 PM|
|DoubleVision||What oil did you use during the break in period?|
|12-19-2009 12:25 PM|
NEW [at time of build ]brodix ik200
|12-19-2009 11:40 AM|
|engineczar||What shape are the heads in?|
|12-19-2009 10:35 AM|
5000miles on a 388 sbc. does not foul plugs .no visible smoke . no pcv.breathers only'no "spatter" out of them . compression:165 /170. leakdown test:2#loss@80psi. what elsedo you guys reccomend I check/test to findout where I'm losing a quart of oil every 500 miles? thanks in advance!