|05-02-2010 03:31 AM|
|gasman41||go to www.hoosiergassers.com they do everything the old school way just there in Indiana|
|04-02-2010 06:21 PM|
Trying to keep the original front frame section(K-member) just makes this a lot harder to do. Go to Speedway Motors web site and look at their Gasser front suspension and frame package to see what things need to look like. The have a couple of PDF files you can look at too.
You can also search at www.jalopyjournal.com which is the HAMB web site(Hokey ***** Message Board). Lots of Gasser info there, and lots of build pic's. I was just looking at a '55 Chevy straight axle build thread there last night.
Biggest problem with keeping the stock front frame is that the drop section in the center of the crossmember is where the straight axle needs to be causing a clearance problem unless you go rediculously high in front, cartoon-ish high.
I'm in the process of gathering parts for making a Gasser out of a '71 Vega, going to build my own rectangle tube front frame like the Speedway set up, which is like most that were done back in the day.
|04-02-2010 10:42 AM|
Forgot one thing
I'm doing this on a real real tight budget, so if somehow I could utilize my existing k-frame that would be great.
Thanks in advance!
|04-02-2010 08:33 AM|
72 Buick Skylark, Gasser style HELP
Ok so I'm just starting a 72 skylark gasser-like project...
I want to put a straight axle on the front but I have no idea where to start?
I've got a 455 pontiac motor almost ready to go in but I'd like to figure out the straight axle first before I start buying motor mounts or a kit to swap from the 350 buick that's in it to the 455 pontiac.
Any help would be great thanks