|08-18-2010 02:53 PM|
|08-18-2010 02:52 PM|
You also need to know the piston/deck clearance at TDC
and the gasket bore diameter and thickness.
|08-18-2010 01:38 PM|
|65malibuSS||the pistons are flat top, 2-valve relief, the bore is 4.030 and stroke is 3.48, and 65cc|
|08-18-2010 11:12 AM|
You need to supply more information to determine the compression ratio.
If you make us guess, we charge extra.
piston dish dome valve relief volume
piston ,deck clearance at TDC
cylinder head chamber volume
head gasket volume or bore and thickness specs
bore ,, stroke
|08-18-2010 10:35 AM|
Which Head Gaskets?
i just wanna get some opinions on what head gaskets i should get,
the motor is a 350 bored .30 over (355cid), aluminum heads, 10.5:1 compression, naturally aspirated motor
i wanna keep it right at 10.5:1, part numbers or suggestions would be awesome thanks!