|10-29-2010 02:13 PM|
|10-29-2010 01:20 PM|
About half the price and looks like it has good flow numbers.
Thanks agian for the info everyone.
|10-29-2010 12:07 PM|
Here's where you can get one.. http://www.alltiresupply.com/p-AB20MTD.html
|10-29-2010 11:04 AM|
|shine||i would use a large tube and fin cooler for volume. avoid a/c condensers that may chock down you flow.|
|10-29-2010 10:43 AM|
Trying to do this low buck.
|10-29-2010 05:01 AM|
|shine||i am moving my compressor up the hill from my shop. i will bury the line coming to the shop and do a field something like lateral lines. let the ground cool the air before it comes into the shop. will have a moisture trap there. a/c condensers work well and can hold 400 lbs .|
|10-28-2010 07:14 PM|
|NEW INTERIORS||You can buy these to put on your Compressor.. Some compressors come with them now..|
|10-28-2010 05:20 PM|
The AC condersor will handle the pressure with no problem at all. Your idea is sound.
|10-28-2010 04:06 PM|
Idea about cooling compressor line temps
Okay, so I got this idea after I was watching Two Guys Garage and thought someone here might be able to confirm or denie an idea I have.
My thought was to put an A/C condenser in the air line system from the output of the compressor. I would mount a fan that would blow air thru the condenser to help cool the air moving it. Kind of like an intercooler for a turbo.
I typically have my compressor output set to 110-120 psi so my question is, would an A/C condenser handle this pressure and would this idea work for cooling the output line temps before running thru a water trap/filter?