|11-08-2010 02:22 AM|
|11-08-2010 02:20 AM|
|theg||I see . That explains why 1/2 hours searching the net I couldnt find anything on running in rollers but plenty on flat tappets .|
|11-08-2010 02:15 AM|
Roller cam's have no 'run-in' like a flat lifter.
Basically just fire it up and drive it. generally avoid driving a steady speed or full throttle use for the first few miles.. but give it some throttle as you need a bit of cylinder pressure to seat the rings.
change the oil and filter after 50 miles and give 'er hell.
|11-08-2010 02:01 AM|
SBC camshaft running in
Any tips for first time start up of a new solid roller cam and valvetrain . Thanks all