|12-10-2010 05:14 PM|
|bosco200||Ok thanks ill check it out tomarrow.|
|12-09-2010 09:43 PM|
Bosco200 , you di ask the question already.
I merged your old thread and the new thread together
|12-09-2010 09:11 PM|
|ericnova72||You assumption is false, just because it is 3/4 ton in no way implies that it has a positraction differential, in fact most of them don't. Generally has to be ordered with posi or with a package that includes positraction as part of its option list, like trailer towing package or camper special package.|
|12-09-2010 08:54 PM|
Posi or No Posi
Ok im not sure if I asked this on here or not but ill ask anyways...1972 C20 Eaton rearend ,4.57 gears, 4 speed manual, 250 ci motor...ok my truck should have posi right? cuz its a 3/4 ton and those really low gears....sometimes both spin but sometimes only one spins...and I dont wanna pull the cover cuz i just put oil in it....what do you think...o also there is no clips that I have to remove to take the axles out I take out the bolts and they slide right out....is that right?
|11-24-2010 11:52 AM|
Thanks for the link but I have a full inventory of the Eaton Posi's so I'm well aware of them.
If you look at the OP's first post he stated he has a Eaton differential. The Eaton diff is a HO52 or a HO72 Differential. I've been dealing with the HO differentials for many many years and I've NEVER seen a clutch style posi used in a HO as they have all been Detroit Lockers. So therefore telling the OP to put posi additive in it is incorrect as it will do no good since the Detroit has NO cutches and is gear driven.
The OP can pull the rear cover on the diff and look in between the holes in the carrier and see if its a Detroit or if its just a open unit. And yes the HO differential is a "drop out" differential but it also has a removable rear cover.
So there ya go Pepi. You got your cherry popped on HO52/72 Differentials
|11-24-2010 10:40 AM|
Have a look here pop your cherry
|11-24-2010 03:25 AM|
|SSedan64||BGH is correct, the Additive increases slip. No Additive = popping/grabbing around corners.|
|11-23-2010 06:42 PM|
to additive or not
Ok not saying I know it all, but thats what we were taught in automotive class year after year, it's in our school books. Could the SAE people be wrong.... maybe. Just saying what we were taught in school. Maybe I'm wrong. Some one find out for sure, or maybe bighead is.
|11-22-2010 07:54 PM|
|big gear head||All manufacturers have their own limited slip oil additive. This is a 4 oz bottle that is added to the gear oil. The jumping that you feel when letting out the clutch is probably clutch chatter and has nothing to do with the rear end.|
|11-22-2010 07:40 PM|
|bosco200||What kind of additive are you talking about...are you talking about Differential oil?...and your saying the more oil in the differential the more it slips?.....O and I have been noticing when I let my clutch out my truck pulls a little and starts you jump a little until I let the clutch all the way out...but thats prolly just old clutch plates right?|
|11-22-2010 10:27 AM|
|prostreet6t9||I have never seen a "clutch" style posi in a Eaton diff. If it has anything it will be a Detroit Locker. Adding additive will do no good. If it does have a detroit it may have some broken pieces causing it to act up.|
|11-22-2010 10:25 AM|
|big gear head||
Most people know that if you leave the additive out it will make the clutches hold better. For a drag race car you want to leave the additive out completely. For street cars you want the clutches to slip smooth when turning corners, and that's what the additive does. The less additive you use the more grip the clutches will have. Too much additive will allow the clutches to slip too easy and you will be spinning one wheel.
I've been in the rear end business a long time. I've also been an oil dealer for over 13 years. I've been around and I know what I'm talking about.
|11-22-2010 01:31 AM|
|11-21-2010 10:51 PM|
Duh, limited slip additive does not make the clutchs slip easier not at all, it helps the clutch pack to lock up better, that is what it is for and it's only purpose. As for turning 1 tire if it is a govenor stye posi it needs pressure and speed to actually lockup, it won't turning it by hand only clutch only types do this. As stated by all the real only way is to pull the cover and at least you can inspect the oil, the gears and for posi when apart. Rip it apart dude, and if it is a posi and the oil looks good (no shiny flakes of clutch material) then use additive with the diff oil or it won't work properly. Good luck. By the way really nice truck, only see 1/2 tons nice to see a 3/4 ton.
|11-21-2010 10:30 PM|
|big gear head||
The limited slip oil additive makes the clutches slip easier, so adding it will only make it worse.
If it has a "posi" and the clutches are worn out then it's going to spin the tires in opposite directions if you jack it up and turn one wheel.
The only way you are going to know what you have is to look inside. There is no other way.
|This thread has more than 15 replies. Click here to review the whole thread.|